Powerwinch 915 Manuel d'utilisateur télécharger pdf

READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE OR MAINTAIN THE

PRODUCT DESCRIBED. PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY IN FOR MA TION.

FAILURE TO COMPLY WITH INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR PROPERTY

DAMAGE. RETAIN INSTRUCTIONS FOR FUTURE REFERENCE.

Description

Trailer winches are used for launching and loading

boats. This winch features power-in and power-out

ca pa bil i ties with a hand-held re mote con trol device.

Unpacking

When unpacking this product, carefully inspect for any

damage that may have occurred during transit.

General Safety Information

The following safety precautions must be followed at

all times:

1. Read all manuals included with this product care-

ful ly. Be thoroughly familiar with the controls and

the proper use of the equipment. Only persons

well acquainted with these rules of safe operation

should be allowed to use the winch.

ALWAYS UNPLUG

THE WIRING HARNESS TO PREVENT AC CI-

DEN TAL STARTING BEFORE AT TEMPT ING TO

INSTALL, SERVICE, RELOCATE OR PERFORM

ANY MAINTENANCE.

2. Never use the winch to lift or move people or ani-

mals.

3. Stand away from the winch when in use and keep

chil dren free from winch area at all times.

ALWAYS STAND

CLEAR OF THE AREA BE TWEEN THE LOAD OR

ANCHOR POINT AND THE WINCH. SERIOUS

INJURY COULD OCCUR, IF THE CABLE BREAKS.

4. Always keep hands clear of cable spool (drum

area).

5. Do not wear loose fitting clothing, scarves, or neck

ties. Loose clothing may become caught in mov-

ing parts and result in serious personal injury.

6. Never use the winch for over head lifting.

7. Always wire the winch with circuit breakers. Failure

to use the breakers could cause overheating thus

creating a potential fire hazard or motor damage.

General Safety (Continued)

THE CABLE FASTEN-

ERS ON THIS OR ANY

WINCH ARE NOT

DESIGNED TO HOLD RATED LOADS. ALWAYS

LEAVE A MIN I MUM OF FIVE WRAPS OF CA BLE ON

THE DRUM AT THE BOTTOM LAYER TO ACHIEVE A

RATED LOAD.

8. Inspect the entire cable for weak or worn condition or

kinking (short tight twist or curl) before each use.

9. When replacing the cable, always use a Powerwinch

cable with the same winch rating and cable

strength.

10. Never substitute rope for cable. Possible injury

could occur.

11. Do not attempt to pull a load greater than the rated

load of the winch.

12. Do not use the winch to hold or support the load

once a job is complete or to permanently secure

the load. Damage could occur to the winch or the

load..

13. Never wrap the winch cable around the load. Use

an Ecostrap™ or chain to prevent the cable from

kinking or fraying.

14. Always wear leather gloves when handling the

cable. Steel cable can cause hand injuries.

After using the winch,

always disconnect the

pow er cord from the

socket to avoid moisture collection in the socket

and prevent the pos si bil i ty of short circuiting.

15. Always block the vehicle wheels to help prevent

the vehicle from rolling when pulling a load with

the winch.

16. Do not operate the winch under the influence of

drugs, alcohol, or other medication.

Specifications

Various load conditions will affect the winch per for-

mance. The line pull required for a specific applica-

tion depends on the weight of the load, condition of

the trailer rollers, and the degree of the loading ramp

incline. The chart on the following page is based on a

single line pull and is a guideline to aid in calculating

pulling requirements.

OPERATION AND PARTS MANUAL

MODEL 915

BOAT TRAILER WINCH

P7040104AV 12/06

1 2 3 4 5 6 7 8

Résumé du contenu

Page 1 - BOAT TRAILER WINCH

READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE OR MAINTAIN THEPRODUCT DESCRIBED. PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY I

Page 2

– 2 –P7040104AV MODEL 915Chart 3 Winch Specifications Line Speed @ Gear Voltage Circuit Unit Weight

Page 3 - Installation

– 3 –P7040104AV MODEL 915BATTERYTERMINAL*5/16" BOLT*5/16"LOCK WASHERAND NUT*12 VOLT CAROR TRUCKBATTERYVEHICLEFRAME* NOT SUPPLIEDFigure 1 Pe

Page 4 - Operation (continued)

– 4 –P7040104AVMODEL 915Installation (continued)3. Run the wire under the vehicle to the battery, at tach-ing at suitable intervals to the vehicle fr

Page 5 - Maintenance

– 5 –P7040104AVMODEL 915CABLEFASTENERCOUNTERBORECABLE DRUMINSERTNEWCABLE2"OR ANCHOR POINT AND THE WINCH. SERIOUS INJURY COULD OCCUR, IF THE CABL

Page 6 - Maintenance (continued)

– 6 –P7040104AVMODEL 915INNERJAM NUTOUTERJAM NUT1. Make sure a load is not attached to the winch. Locate the jam nuts on the rear shaft on the left s

Page 7 - General Troubleshooting Guide

– 7 –P7040104AVMODEL 9151. Start checking the wiring at the battery. Bypass the circuit breakers and test the winch. If the winch operates, replac

Page 8 - Limited Warranty

P7040104AV MODEL 915Limited WarrantyA. This Limited Warranty is given by the Pow er winch Di vi sion of the Scott Fetzer Com pa ny (the “Com pa ny”)

Commentaires sur ces manuels

Pas de commentaire

Powerwinch 915 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Accessoires pour l'eau Powerwinch 915. Powerwinch 915 User Manual [de] Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Accessoires pour l'eau Powerwinch 915